Zedbull & Eeprom

Enlarge Pic.....

(Price inc Vat)
* Transponder Identification *
* Transponder Cloning *
* Transponder Production *
* PC Software & Database *
* Produces Crypto *




Features:

• Identification of ALL Transponders, including 8C
• Shows Lock Status
• Clone or Copy Fixed 11, 12, 13, 33, 73, T5, 4C to EH2 or TPX1
• Clone or Copy Crypto 40(some), 41, 42, 44 &45
• Clone or Copy Crypto 4D to EH2 or TPX2
• Transponder Production from low cost blanks
Produces Blank 40, 41, 42, 44, 45, 46, 73, 61, 62, 65
• Transponder Test Function
• Reads Pincode from 33 Renault keys and 45 Peugeot Keys

Optional Features:

EEPROM Applications:

• Enables pincodes to be read from immobiliser or ECU by IC or Microprocessor removal
• Programs transponders ready to start vehicle
• Detailed immobilser pictures, pin pointing IC to be removed
• Ideal for the professional Auto Locksmith
• Please note, EEPROM reading & desoldering equipment

VAG Pincode reading - Reads pincodes direct from the OBD 16 pin socket on:
VW, Audi, Seat & Skoda

Kit Contents:

• Zed-Bull Programmer
• Security Log-in Card
• PC USB Cable
• Power Adapter
• 12V Cigar Lighter Adapter
• Operating Manual
• Transponder Box

Enlarge Pic...

This programmer and Zedbull PC software enables users to read the Eeprom file form the de-soldered Eeprom and save it as a PC file.

How it Works...
The Zed-Bull Eeprom software (Ref:4655) uses the data file found on the chip (Ref:4896) and will read the pincode or prepare a transponder ready to start the vehicle.

Therefore we recommend the Zedbull Eeprom software option in order for you to maximise and make the most out of your IC programmer.




Please Note:

The IC Programmer will only operate on a PC with a 25pin LPT connection.

(Price inc Vat)
• 55 Manufacturers
• Gives picture of immobiliser/ECU
• Highlights Eeprom to be removed
• Shows IC reader board to be used
• Loads 'Bin' or 'Dat' file from PC
• Prepares transponder data
• Creates transponder ready key to start vehicle
• Reads vehicle pincode

Enlarge Pic...

(Price inc Vat)
* This hot air station enables Eeproms to be removed from circuit boards*

* An essential tool*





The pack comes complete with:

• Hot Air Gun
• Soldering Iron
• Extraction System
• A Range of Essential Accessories

Enlarge Pic...

(Price inc Vat)
* Stand Alone Cloning of 4D Texas Crypto*






We are pleased to announce the release of an exciting new module to enable the Zed-BULL to clone Texas Crypto 4D transponders using a stand alone cloner.

This new module connects to the rear of the Zed-BULL and then works instantly without the need of the PC software or the internet.

Once the module is connected you use the normal Zed-BULL antenna and read / write buttons as normal. Copying is completed in seconds. In addition the Zed-BULL will use either Silca EH2 electronic heads or JMA TPX2 transponders. (now available as just a transponder)

The benefits include :

• No internet connection required
• No PC software required
• Easily cloned in the Van or at the customers premises
• No waiting time
• Quicker and simpler than programming especially on coded systems